Description

2021-24 Ford Bronco 4WD [Bilstein Factory Shocks]

Fabtech’s 5″ Lift Kit for the Ford Bronco is built tough with 1/4″ thick steel for unbeatable strength. Designed to keep your 38″ or 40″ tires snug under the fenders while maintaining factory alignment, to ensure stability on any terrain. Skid plates add protection for the front differential & sway bar actuator, which means this kit is ready for adventure.

The factory front and rear Coilover shocks are retained and receive spacers that provide height while maintaining the comfortable stock highway ride quality.

You can embark on every adventure with peace of mind, knowing that your suspension is FMVSS126 Certified, and protected by a 5-year, 60,000-mile powertrain warranty. Upgrade your Bronco and take on the next trail with confidence.

Features

Crossmembers

1/4″ thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional strength to the front suspension.

Steering Knuckles

Fabtech’s extended length ductile iron Steering Knuckles provide zero bump steer throughout the suspension travel. This provides an enhanced driver experience compared to stock. Near stock track width keeps the tires under the fenders for a clean appearance.

Coilover Spacers

The factory Coilovers are relocated with heavy duty lower mounts to lift the vehicle while retaining the stock ride quality.

Skid Plate

A heavy-duty front differential Skid Plate is constructed of 1/4″ thick steel to protect the diff from offroad obstacles.

Differential Mounts

Triple Differential Mounts properly reposition the front diff for the precise CV and driveshaft angle to reduce driveline vibration at high speed.

Sway Bar Mounts

1/4″ thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range.

Part Numbers

– California Prop 65 Warning

• FOOTNOTES

  123. Will not fit Raptor models.
  238. Fits models equipped with Bilstein shocks only.
  255. Does not fit vehicles equipped with HOSS 3.0 package.
  260. Will not fit vehicles equipped with M190 front differential and front axle disconnect assembly (FAD).

  272. FTS22349 and FTS22350 will not work with the 5” and 6” kits.

WE HAVE NOT TEST FIT THIS ON THE 2025 4-DOOR FORD BRONCO

Additional information

Tires & Wheels

• Use 38/12.50R17 tires w/ 17×9 wheels w/ 4 1/2″ BS w/ minor trimming
• Use 38/12.50R18 tires w/ 18×9 wheels w/ 4 1/2″ BS w/ minor trimming
• Use 38/12.50R20 tires w/ 20×9 wheels w/ 4 1/2″ BS w/ minor trimming

• Use 40/12.50R17 tires w/ 17×9 wheels w/ 4 1/2″ BS w/ cutting
• Use 40/12.50R18 tires w/ 18×9 wheels w/ 4 1/2″ BS w/ cutting
• Use 40/12.50R20 tires w/ 20×9 wheels w/ 4 1/2″ BS w/ cutting