Description

 *Uses factory bezel (not included).

Analog Gauges

• Speedometer  –  00-160 MPH (optional metric version 0-255 km/h)
• Tachometer  –  0-8,000 RPM
• Oil Pressure  –  0-80 PSI
• Water Temperature   –  100-260*F (optional metric version  40-120*C)
• Fuel Level  –  E – 1/4, 1/2, 3/4, F
• Voltmeter  –    9-17 VDC

Lighting

·Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.

Digital Message Centers

Standard Displays

• Odometer (One time user settable, Million Mile)
• Dual  (A/B)  Trip Meter (0-9,999.9)
• Clock (12 Hour)

Performance Meters

• 0-60 MPH Timer (0-100 km/h)
• 1/4 mile time
• 1/4 mile end speed (trap speed)
• High speed recall
• High RPM recall

Gauges

• Speedometer (0-255 MPH/kmh)
• Tachometer  –  (0-9,900 RM)- RPM
• Oil Pressure  –  (0-100 psi displayed in 1 psi increments)
• Water Temperature   –  (100-300*F/40-150*C displayed in 1* F/C increments)
• Fuel Level  –  0-99%
• Voltmeter  –    9-17 VDC

Lighting

• Auto-contrasting LCD display for optimal view in the brightest of sunlight.
• LED backlit at night to match/complete the look at night.

Built-In Indicators

Indicators

• Turn Signal (Left/Right)
• High Beam
• Check Engine
• Parking Brake
• Cruise Control (On / On & Engaged when vehicle is equipped)
• Gear Position (Optional GSS-3000 sensor required)
• 4×4 (When vehicle is equipped)
• NOT ALL OEM INDICATOR LAMP FUNCTIONS WILL BE REPLACED
• • If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.

Included Sensors

Water Temperature

• 1/8″ NPT, Grounded isolted sensor with a 10ft harness

Oil Pressure

• 1/8″NPT solid state sensor with a 10 ft harness

Cable Driven Speed Sensor/Generator

• Replaces GM style speedometer cables with a 10 ft harness.  Sensor requires approximately 5″ clearance extending between the cable drive output and nay obstruction.  Part #130011 (sold separately) allows for relocation of the pulse generator when additional clearance is required.  (Tremec and Ford style adapters available on request.)

Bushings

• Each kit comes with 1/8″ to 1/4″, 3/8″ and 1/2″ NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.

Calibration

•  Push Button